StrategyQuant X · Storage
StrategyQuant X Tick Data: How Much Disk Space Do You Really Need?
StrategyQuant says you need "sufficient free disk space" and gives no number for data. We have one real number from a working server, and it is smaller than most people expect.
Quick answer: on our benchmark server, tick and M1 history for 29 instruments took about 92 GB, about 3 GB per instrument on average. That is 5% of one 1.92 TB disk. For a handful of instruments 250 GB is enough, 512 GB is comfortable, and the thing that really fills disks is tick data exported for MetaTrader, not SQX itself.
Measured
One real number: 29 instruments, about 92 GB
The server from our StrategyQuant X benchmark worked for five weeks on 15 projects. Its data folder held tick and M1 history for 29 instruments, about 92 GB in total. The tests used about 7 years of history, from October 2017 to October 2024.
What we do not know. This is one total for the whole data folder. We do not have the size of each instrument or the exact number of years stored for each one, so the average hides large differences. An active pair such as EURUSD has many more ticks than an exotic cross. Use the average for a first estimate and then check your own folder.
Your turn
A first estimate for your own set
Multiply the number of instruments by our average. This is rough arithmetic from one server, not a specification.
| Instruments with tick and M1 history | Estimated data size | Note |
|---|---|---|
| 1 | about 3 GB | Average. A busy pair will be larger |
| 5 | about 16 GB | A small forex set |
| 10 | about 32 GB | Majors and a few crosses |
| 29 | about 92 GB | Measured on our benchmark server |
| 50 | about 159 GB | Extrapolation beyond what we measured |
To get your real number, download one instrument for the years you need, look at the size of the data folder and multiply. It takes minutes and is more accurate than any table.
M1 or tick: you may need less than you think
Tick data is the large part. M1 data is much smaller, and a StrategyQuant administrator notes that M1 can be downloaded directly to save storage space and download time.
In our run the Builder generated 130.7 million strategies on M1 data. Tick precision was used only in a separate tick retest, for 5,729 candidates that had passed earlier filters. That retest took 12.6 of 692 working hours. So tick history was needed only for the instruments and years that reached the retest. The order of steps is described in the workflow article.
Sources
The numbers you will see elsewhere, side by side
Figures about tick data are easy to mix up because they describe different formats. Sources checked on November 18, 2026.
| Figure | What it describes | Source |
|---|---|---|
| About 92 GB for 29 instruments | Tick and M1 history as stored for StrategyQuant X on a working server | Our benchmark server, 2026 |
| 250 GB free disk space | Minimum recommended configuration | StrategyQuant blog |
| 512 GB SSD or NVMe | Configuration for smooth work and for quick build | StrategyQuant blog |
| 1 TB SSD or NVMe | Top advanced configuration | StrategyQuant blog |
| "Sufficient free disk space", SSD or NVMe recommended | Current official requirements, no number given | StrategyQuant support page |
| About 4 GB for 6 months of AUDCAD | Tick data exported for MetaTrader 4. A different, much larger format | StrategyQuant forum, administrator |
| About 200 MB per symbol per year | Raw compressed Dukascopy data in Tickstory. Another tool, shown for scale only | Tickstory FAQ |
The three StrategyQuant disk sizes are for the whole computer, not for data alone. Our measured data set would use about 18% of the recommended 512 GB.
The real risk
Where disk space actually goes
Inside SQX the history takes a moderate amount of space. The surprises come from the next step, when data leaves SQX.
| What takes space | How much | What to do |
|---|---|---|
| Tick and M1 history for SQX | About 3 GB per instrument on average in our case | Download only the instruments and years you test |
| Tick data exported for MetaTrader 4 | Gigabytes per instrument for months, not years. An administrator measured about 4 GB for 6 months of one pair | Export only the period you are testing and delete old exports |
| MetaTrader tester files | Can grow without warning. One forum user reported a single tester file of 35 GB | Watch the tester folder and clear it between tests |
| SQX projects, databanks and logs | Not measured in our run, so no figure here | Check the size of the user folder from time to time |
If you test exported Expert Advisors in MetaTrader 4 with tick data, plan the disk for that, not for SQX. Tickstory also documents a limit of 4 GB for one FXT file in MT4, so long tick tests there have to be split into shorter periods.
Speed
Does a faster disk make SQX faster?
Mostly no. StrategyQuant states that CPU performance has the greatest effect on generation and backtesting speed, and it recommends an SSD or NVMe without promising a gain from it. In our run the work was on the processor: 15 threads busy for 692 hours.
We did not measure SSD against NVMe, so we do not give a number. What a fast disk does help with is loading large tick files, saving databanks and copying data. If the budget is limited, spend it on CPU threads and RAM first. See StrategyQuant X system requirements and how long robustness checks take.
Hardware
Would a data set like ours fit?
Disk sizes of current Winservers.NET plans, compared with 92 GB of data plus Windows, SQX and working files.
| Machine | Disk | A 92 GB data set like ours |
|---|---|---|
| Windows VPS VIRTUAL-8 and VIRTUAL-10 | 80 GB SSD | Does not fit |
| Windows VPS VIRTUAL-15 | 120 GB SSD | Not realistic next to Windows and SQX. Fine for a few instruments |
| Windows VPS VIRTUAL-20 to VIRTUAL-64 | 180 GB SSD | Fits, with little room left for MetaTrader exports |
| Dedicated INTEL-I5-64 | 2x 512 GB NVMe | Fits with a wide margin |
| Dedicated INTEL-I9-129 and RYZEN-7950X3D | 2x 1.92 TB NVMe | Fits many times over |
| Your own PC | Check free space | Fits if you have about 150 GB free or more |
Disk is rarely what decides between a VPS and a dedicated server for SQX. CPU threads and RAM decide, and the dedicated plans happen to have large disks too. Prices are in how much StrategyQuant X costs and on the VPS and dedicated servers pages. The choice itself is covered in StrategyQuant X Server: VPS or Dedicated?
Keep the disk small
- Download only the instruments you test.
- Use M1 for generation and tick data for the final retest.
- Limit the years to the period you test.
- Delete MetaTrader exports after each test.
Do not save in the wrong place
- Do not run with a nearly full disk: long runs write results for days.
- Do not keep the only copy of your strategies on one disk.
- Do not buy disk before CPU and RAM.
FAQ
Frequently asked questions
How much disk space does StrategyQuant X need for tick data?
On our benchmark server, tick and M1 history for 29 instruments took about 92 GB, about 3 GB per instrument on average. Single instruments differ a lot: active pairs have many more ticks. StrategyQuant itself gives no figure for data and recommends 512 GB of SSD or NVMe for regular work and 1 TB for a top configuration.
Do I need tick data to generate strategies in StrategyQuant X?
Not for generation itself. In our run the Builder worked on M1 data and tick precision was used only in a separate retest of the candidates that survived earlier filters. That keeps generation fast and uses tick data where it matters.
Does a faster disk make StrategyQuant X faster?
Mostly no. StrategyQuant states that CPU performance has the greatest effect on generation and backtesting speed. An SSD or NVMe is recommended so that loading data and saving results do not slow the work down. We did not measure the effect of the disk separately.
Is M1 data smaller than tick data?
Yes. A StrategyQuant administrator notes that M1 data can be downloaded directly to save storage space and download time. Tick data gives better precision and takes much more room.
Why is my disk full after exporting tick data to MetaTrader?
Data exported for the MetaTrader 4 tester is much larger than the same history inside SQX. A StrategyQuant administrator measured about 4 GB for 6 months of one pair, and a user reported a tester file of 35 GB. Tickstory also documents a 4 GB limit for one FXT file in MT4. Export short periods and delete old files.
Is a VPS disk enough for StrategyQuant X data?
For a few instruments, yes. Our VPS plans have 80 to 180 GB disks. A data set like the one on our benchmark server, about 92 GB, needs the 180 GB plans or a dedicated server.
Where does StrategyQuant X get tick data?
Forex, CFD and crypto tick data from Dukascopy is included in the platform at no extra cost. Premium equities and futures data is a separate subscription, included in the Ultimate edition.
Not sure your data will fit?
Tell us how many instruments and years you test and whether you export tick data to MetaTrader. We will suggest a server with enough disk, CPU and RAM.